Citam ja ali ne razumijem, evo komplet ModemData pa ako neko zna sta tu pise neka javi.
Code:
The most recent update of scanModem accessed at
http://linmodems.technion.ac.il/packages/scanModem.gz
should ALWAYS be used!! This update was done on: 2005_Jan_09
URLs to cogent advice are regularly updated, so your problem may be solved therein.
If further help is needed, send a description of your problem to:
[email protected] with this ENTIRE file Attached,
It includes subtle diagnostic ouputs needed to best guide you.
If your PC is a laptop, please provide Make and Model information.
DO use the following line as the email Subject Line, to alert cogent experts:
scanModem,
Welcome to kernel 2.4.26
Occassionally reponses are blocked by an Internet Providers mail filters.
So do in a day also check the Archived responses at
[email protected]
------------ -------------- System information ------------------------
Welcome to
on System with processor: i686
currently under kernel: 2.4.26
assembled with compiler: 3.3.4)
with current System compiler GCC=3.3.4
/usr/bin/gcc -> gcc-3.3.4
Checking for kernel-headers needed for compiling.
/usr/src/linux is the kernel-source/ location
UTS are: 2.4.26
/usr/src/linux-2.4.26 is the kernel-source/ location
UTS are: 2.4.26
Modem symbolic link is: /dev/modem -> ttyS4
Modem candidates are at PCI_buses: 00:0b.0
Providing detail for device at PCI_bus 00:0b.0
with vendor-ID:device-ID
----:----
Class 0780: 8086:1040 Communication controller: Intel Corp. 536EP Data Fax Modem
SubSystem 5214:0034 Unknown device 5214:0034
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at dfc00000 (32-bit, non-prefetchable) [size=4M]
Capabilities: [e0] Power Management version 2
-----PCI_IDs------- --CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 8086:1040 5214:0034 slackware 2.4.26 3.3.4) 3.3.4 i686
Information on several modem chipset providers is provided below,
because ambiguities remain on the correct choice of supporting software.
== Checking PCI IDs through modem chip suppliers ==
Vendors 127a and 14f1 are Conexant, successor to Vendor=148d Rockwell technology.
With respect to software support there are two main types, hcfmodem* and hsfmodem* .
http://linmodems.technion.ac.il/resources.html#conexant has scripts
For HSF modems.
For HCF modems.
aiding installation.
The HCF (Host Controller Free) which have a digital signal processsing (DSP) chipset,
while the HSF in the soft modem family without a dsp.
HSF support of version 5.03 is included with SuSE 9.0 for support of 2.4.21 version kernels.
For support of 2.6.n kernels, new releaseses are provided at http://www.Linuxant.com/drivers/
Linuxant is providing free test packages for low speed CONNECTs.
There is a one time subscription fee for full high speed support.
A detailed software installation example is provided at:
http://linmodems.technion.ac.il/archive-fourth/msg00350.html
SuSE Conexant installation Re: Emergency!!! /Date:/ Wed, 11 Feb 2004 06:10:39 -0500
Modems with the following PCI_IDs also have Conexant HCF (Controller free) chipsets.
1024:1024 (Zenith Data Systems)
148D:1003 (DIGICOM Systems)
158B:0015 (Allied Data Technologies Tornado VFM56x-PRC)
141A:1035 (Apache Micro)
The following six may be either HCF of HSF modems. Test the HSF package first
(127a,14f1):(1025,1085, 2005)
Should a HCF driver installation fail to serve among there,
then uninstall and instead try the HSF driver resource.
Subsystem HSF Conexant soft modems serve under AC97 or MC97 controllers. These include:
14f1:(5422 2002) , plus many others with vendors assigned PCI IDs.
SubSystem 104d:814e under a 1039:7013 Silicon Integrated Systems modem controlled has a Conexant chip
After loading of HSF drivers, there will be displayed by command: /sbin/lsmod
Module Size Used by Tainted: P
hsfich 119116 0 (autoclean)
hsfserial 26388 0 (autoclean)
hsfengine 1126348 0 (autoclean) [hsfserial]
hsfosspec 35328 0 (autoclean) [hsfich hsfserial hsfengine]
plus many others not modem related.
While drivers are pre-compiled for some Linux distributions,
the installation of the HCF/HSF packages DOES in general require kernel-source/ preparation,
as described in Modem/DriverCompiling.txt.
There is a conflict between modules snd-intel8x0m and hsfmc97ich.
The snd-intel8x0m Must be loaded first or the system may hang upon hsfmc97ich insertion.
http://linmodems.technion.ac.il/archive-fourth/msg03027.html
A post install suggestion for adjusting PCI latency is:
http://phep2.technion.ac.il/linmodems/archive/msg05210.html
Vendor=8086 is Intel, Inc. producing HaM and 536ep host controller free (HCF) modems, 537 soft modem
and AC97 and MC97 controllers managing a varierty of non-Intel soft modem Subsystems.
These subSystems often have PCI_IDs assigned by the modem assembler, rather than the chip provider.
Download available drivers from: http://developer.intel.com/design/modems/support/drivers.htm
Also check at: http://linmodems.technion.ac.il/resources.html
for beta releases and perhaps Already compiled drivers for some Linux distributions
---------------------
======= PCI_ID checking completed ======
Update=2005_Jan_09
A PCMCIA CardBus is not detected on this System.
The following information blocks just query some ppp support items.
====================================================
grep ppp /etc/modules.conf
-------------------------------------
-------------------------------------
Resident PPP support modules are properly uncompressed .
----active COMM services are ------------
eth0 Link encap:Ethernet HWaddr 00:07:95:DF:01:C2
This COMM mode should be closed before using the modem, or DNS services may fail.
Be sure to read the section about ppp related modules and aliases in Modem/General.txt
Be sure to read the Ethernet section of Modem/General.txt
DEVPPP=crw-rw---- 1 root uucp 108, 0 2001-03-25 23:04 /dev/ppp
The current modem symbolic link is: /dev/modem -> ttyS4
The ports /dev/ttyS0 or 1,2,3 are for standard Controller chip modems
No devfsd.conf file found, indicated absense of the devfsd daemon package
for device file system (devfs) symbolic link support.
DEVFSD=
---- dmesg queries -------
slackware is not yet providing pre-compiled drivers for WinModems