Kako ni on odmah nije hteo da se instalira (kada mu se ukaze na /lib/modules/2.6.13-15-default/build odnosno /usr/src/linux-2.6.13-15-obj/i386/default/ u toku instalacije) instalirao sam izvorni kod jezgra, kopirao /boot/config-2.6.13-15-default u njegov direktorijum kao .config i kompajlirao jezgro i module (ni jezgro ni module nisam instalirao, jer su bili isti kao i vec instalirani). Putanju gde se nalazi izvorni kod jezgra (/usr/src/linux-2.6.13-15) sam predao u toku instaliranja drajvera, nakon cega se drajver uspesno instalirao.
Stvar je medjutim u tome sto sada kada modem (navodno) radi, kada se uspostavi veza ona traje najvise par minuta nakon cega se prekida, dok u Windows-u radi odlicno.
U datoteci /var/log/messages ono koje se tice konekcije, stoji:
Dec 19 02:57:47 linux pppd[5601]: Plugin passwordfd.so loaded.
Dec 19 02:57:47 linux pppd[5601]: pppd 2.4.3 started by axa, uid 1000
Dec 19 02:57:47 linux pppd[5601]: Using interface ppp0
Dec 19 02:57:47 linux pppd[5601]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 19 02:57:50 linux pppd[5601]: PAP authentication succeeded
Dec 19 02:57:50 linux kernel: PPP BSD Compression module registered
Dec 19 02:57:50 linux kernel: PPP Deflate Compression module registered
Dec 19 02:57:51 linux pppd[5601]: local IP address 212.62.34.129
Dec 19 02:57:51 linux pppd[5601]: remote IP address 212.62.44.3
Dec 19 02:57:51 linux pppd[5601]: primary DNS address 212.62.44.7
Dec 19 02:57:52 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 19 02:57:53 linux ifup: No configuration found for ppp0
Dec 19 02:57:54 linux pppd[5601]: Script /etc/ppp/ip-up finished (pid 5645), status = 0x0
Dec 19 02:57:59 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 19 02:58:20 linux pppd[5601]: Hangup (SIGHUP)
Dec 19 02:58:20 linux pppd[5601]: Modem hangup
Dec 19 02:58:20 linux pppd[5601]: Connect time 0.5 minutes.
Dec 19 02:58:20 linux pppd[5601]: Sent 729 bytes, received 446 bytes.
Dec 19 02:58:20 linux pppd[5601]: Connection terminated.
Dec 19 02:58:20 linux ifdown: No configuration found for ppp0
Dec 19 02:58:20 linux ifdown: Nevertheless the interface will be shut down.
Dec 19 02:58:20 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
Dec 19 02:58:20 linux pppd[5601]: Script /etc/ppp/ip-down finished (pid 5745), status = 0x0
Dec 19 02:58:20 linux pppd[5601]: Exit.
Dec 19 03:00:28 linux pppd[5882]: Plugin passwordfd.so loaded.
Dec 19 03:00:28 linux pppd[5882]: pppd 2.4.3 started by axa, uid 1000
Dec 19 03:00:28 linux pppd[5882]: Using interface ppp0
Dec 19 03:00:28 linux pppd[5882]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 19 03:00:31 linux pppd[5882]: PAP authentication succeeded
Dec 19 03:00:32 linux pppd[5882]: local IP address 212.62.34.129
Dec 19 03:00:32 linux pppd[5882]: remote IP address 212.62.44.3
Dec 19 03:00:32 linux pppd[5882]: primary DNS address 212.62.44.7
Dec 19 03:00:32 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 19 03:00:32 linux pppd[5882]: Script /etc/ppp/ip-up finished (pid 5904), status = 0x0
Dec 19 03:00:34 linux ifup: No configuration found for ppp0
Dec 19 03:00:38 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 19 03:01:52 linux pppd[5882]: Hangup (SIGHUP)
Dec 19 03:01:52 linux pppd[5882]: Modem hangup
Dec 19 03:01:52 linux pppd[5882]: Connect time 1.4 minutes.
Dec 19 03:01:52 linux pppd[5882]: Sent 952 bytes, received 2194 bytes.
Dec 19 03:01:52 linux pppd[5882]: Connection terminated.
Dec 19 03:01:53 linux ifdown: No configuration found for ppp0
Dec 19 03:01:53 linux ifdown: Nevertheless the interface will be shut down.
Dec 19 03:01:53 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
Dec 19 03:01:53 linux pppd[5882]: Script /etc/ppp/ip-down finished (pid 6002), status = 0x0
Dec 19 03:01:53 linux pppd[5882]: Exit.
Dec 19 03:02:30 linux pppd[6117]: Plugin passwordfd.so loaded.
Dec 19 03:02:30 linux pppd[6117]: pppd 2.4.3 started by axa, uid 1000
Dec 19 03:02:30 linux pppd[6117]: Using interface ppp0
Dec 19 03:02:30 linux pppd[6117]: Connect: ppp0 <--> /dev/ttySHSF0
Dec 19 03:02:33 linux pppd[6117]: PAP authentication succeeded
Dec 19 03:02:34 linux pppd[6117]: local IP address 212.62.34.129
Dec 19 03:02:34 linux pppd[6117]: remote IP address 212.62.44.3
Dec 19 03:02:34 linux pppd[6117]: primary DNS address 212.62.44.7
Dec 19 03:02:34 linux modify_resolvconf: Service pppd modified /etc/resolv.conf. See info block in this file
Dec 19 03:02:34 linux pppd[6117]: Script /etc/ppp/ip-up finished (pid 6139), status = 0x0
Dec 19 03:02:35 linux ifup: No configuration found for ppp0
Dec 19 03:02:39 linux poll.tcpip: Checking for network time protocol daemon (NTPD): ..unused
Dec 19 03:03:14 linux su: (to root) axa on /dev/pts/2
Dec 19 03:04:01 linux pppd[6117]: Hangup (SIGHUP)
Dec 19 03:04:01 linux pppd[6117]: Modem hangup
Dec 19 03:04:01 linux pppd[6117]: Connect time 1.5 minutes.
Dec 19 03:04:01 linux pppd[6117]: Sent 0 bytes, received 0 bytes.
Dec 19 03:04:01 linux pppd[6117]: Connection terminated.
Dec 19 03:04:02 linux ifdown: No configuration found for ppp0
Dec 19 03:04:02 linux ifdown: Nevertheless the interface will be shut down.
Dec 19 03:04:02 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.pppd.ppp0 to /etc/resolv.conf
Dec 19 03:04:02 linux pppd[6117]: Script /etc/ppp/ip-down finished (pid 6263), status = 0x0
Dec 19 03:04:02 linux pppd[6117]: Exit.
... itd. skoro sasvim isto za svako novo uspostavljanje veze.
Izlaz komande "lspci -vv" za modem je:
00:0f.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
Subsystem: Conexant Dynalink 56PMi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4800000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at a000 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Svaki savet je dobrodosao. Hvala.